Before you begin, it’s essential that your business familiarizes itself with local standards and regulations regarding accessibility. Many products, such as those from the Bobrick brand, specify in their installation documents the exact dimensions needed to meet the needs of people with reduced mobility.
For example, it’s generally recommended that accessories be installed with their “functional parts” (such as dispensing mechanisms, start buttons, electrical outlets, or dispenser openings) at a maximum height of 48 inches (1220 mm) above the finished floor. When these accessories are mounted above obstacles such as counters or waste receptacles, they should be installed at a height between 44 and 48 inches (1120 and 1220 mm) above the floor, depending on the nature and depth of the obstacle. Finally, the functional parts of all accessories must be positioned at a minimum height of 15 inches (380 mm) above the floor.
Regarding hand dryers, it’s recommended to install them leaving enough clear floor space to allow for both left-hand and right-hand approaches. Alternatively, it’s possible to install two dryers, one for each type of approach. If only one dryer is planned, it’s advisable to place the functional part at 40 inches (1015 mm) above the finished floor. In the case where two or more dryers are installed, one should be mounted at 40 inches (1015 mm) and the other at a maximum height of 48 inches (1220 mm) above the finished floor.
For people in wheelchairs, the 2017 ICC standards for new buildings have expanded the circular maneuvering spaces to a diameter of 67 inches (1700 mm). However, for existing buildings, a 60-inch (1525 mm) circular space remains acceptable. This space allows a person in a wheelchair to make a U-turn (180 degrees) or a full turn (360 degrees) without difficulty. This information is essential to ensure that your facilities are compliant and properly equipped. For specific regulations or particular requirements, you can refer to the “Planning Guide for Accessible Restrooms”.